everydaycarry-essentials.com – Page 10 – Your Everyday Carry/Concealed Carry Information Place

August 29, 2022November 7, 2022

DBTAC TACTICAL SLING PACK

Product Review

Cool Little Sling Pack

Product: DBTAC Tactical Sling Pack

Price: $31.99

Durability: High

Best Place To Buy This Product: Amazon

My Overall Rating: 9.0

Quick Product Overview:

The DBTAC Tactical Sling Pack is a multi-purpose EDC bag for varied outdoor activities such as day hikes, and biking, or even a quick trip to the range. It is also ideally used as a Camera bag.
It has a front and middle compartment equipped with multi-admin slots and zipper pockets that are spacious to keep your wallet, phone/tablet, keys, eye/ear protection, etc.
This bag is very comfortable to carry and easily switches from the left to right side options.
It has a padded and adjustable shoulder strap.
This Discreet Tactical Chest Pack also features a CCW pocket at the rear of the pack with 5 Mags elastic straps to carry your handgun magazines.

Specifications Of This Product:

The DBTAC Tactical Sling Bag features 4 compartments: The main pocket is L10”xW12“xH1.5“.
It has a universal holster with a hook strap that fits most popular pistol sizes (designed to store your pistol in a tactical bag backpack with loop panel)
The DBTAC Sling Pack is made of 600D polyester fabric, which is robust, waterproof, and yet lightweight.
It contains sturdy dual zippers with a lock hole (Dia.0.2″) fits most luggage locks, and provides reliable security for your belongings while transported to the shooting range or daily commuting.
It has reinforced sewing at all strength points and it is built to last.
It also comes with an embroidered USA flag patch (3.1″x2.2″),

What I Like About This Product:

This pack is very high quality, it is made RIGHT! Great fabric, good quality stitching, great zippers and feels good when you are using it. For a small bag, it holds a lot of stuff! It is big enough to carry any full-sized handgun too and that’s a plus. Plus it comes with an embroidered American flag, how cool is that!

What I Would Change About This Product:

The only thing I changed on this sling pack was the holster. The one that they include with this pack works, but I am a little spoiled. I bought a “Flat Back Holster” from COOK’S HOLSTERS, INC. a few years ago for one of my other concealed carry backpacks and nothing else seems to compare to that one. If you carry your handgun in a backpack, you might want to check it out. Go to https://www.cooksholsters.com/. Other than that, this is a really nice sling pack.

Final Remarks:

As you can see I like this sling pack but let me tell you why I bought this pack: First of all it’s not like I need another pack but this one seems to fit my need. I am not a big fan of off-body carry, I like my IWB holster for my handguns. But every now and then off-body is needed for me. I live in Colorado and during the summer it can get pretty hot. My normal CCW clothes in the summer are blue jeans, a tee shirt (tucked-in), and an unbuttoned, untucked short sleeve shirt as a cover garment. Well, that works great for me but my wife thinks I look sloppy with an unbuttoned, untucked shirt. That’s where this sling bag comes in. Whenever my wife and I go out, I can wear my shirt tucked in and still carry my handgun on my person. This pack is nice and small but still carries all that I need to carry. When I sit in a restaurant I just move the bag around the front and can sit back in my chair like normal. I never have to take it off and therefore I can never leave the pack at the restaurant by mistake. Plus it is so light that you never know you have it on. It’s a great little bag and works well in many different applications.

If you are interested in this product, click here. If you are interested in similar products, click on the link below and it will take you to my EDC Backpack page, Thanks for reading this product review.

Go To EDC Backpack.

If you have any questions about this product review or anything else related to Everyday Carry (EDC)/Concealed Carry, feel free to leave a comment below and I will be happy to get back to you.

Thanks,

Larry

Founder of Everyday Carry Essentials

August 15, 2022November 17, 2023

THE KENAI CHEST HOLSTER

Product Review

What a Great Outdoor Holster

Product: The Kenai Chest Holster

Price: $159.00

Durability: High

Best Place To Buy This Product: gunfightersinc.com

My Overall Rating: 9.0

Quick Product Overview:

The Kenai Chest Holster was designed as the ultimate way to carry a firearm when hiking, hunting, fishing, or any other outdoor activity.

We settled on a blend of Kydex and Nylon for excellent retention characteristics, weatherproofing, and lightweight. The Kenai Chest Holster is a perfect pairing with a modern firearm such as the Glock 40MOS or a classic big bore revolver such as the Ruger Super Redhawk.

No matter what you’re doing in the backcountry, the placement of the firearm on your chest helps you be a hard target anywhere without compromising your choice of firearm. You can carry as big of a firearm as possible with maximum comfort. The centered position on the chest allows for a quick draw from any position, even when wearing bulky winter clothing or seated in a vehicle.

Specifications Of This Product:

Right or Left handed.
30% Angle.
Magazine holders available
Adjustable retention.
Sweat guard.
The Kenai Chest Holster was designed with all-day comfort in mind.
The harness utilizes wide flat nylon webbing and buckles and also has heavy-duty double-layer elastic sewn in key locations, so it expands and contracts as you breathe.
The Holster is made of Kydex material
Each shell is custom-made for your specific handgun.

What I Like About This Product:

The Kenai Chest Holster is a great holster for anyone who is active in the outdoors. If you like to fish, hunt, backpack, hike, ride horses, ride 4-wheelers, etc. then this holster is for you. I have one of these holsters for my Glock 30, (.45ACP) and then I bought a shell for my Glock 20, (10mm). They are extremely comfortable and yet holds my handguns very secure. This is not a concealed carry holster but you can where a vest or a coat over the top if you like.

The object of this holster is to be able to get to your handgun quickly without having to push clothes aside and that’s what I like about this holster. If you are looking for a concealed carry holster, go with the Spectre Shoulder Holster.

Another nice thing about this holster is you do not have to buy the entire holster for every caliber handgun that you want, just buy the shell of the new gun.

What I Would Change About This Product:

No changes as of now.

Final Remarks:

The Kenai Chest Holster by Gunfighters Inc. is one of my favorite holsters for the outdoors. There are so many activities that this holster can be worn that makes carrying a gun a pleasure instead of a pain. The comfort level is excellent and the gun security is much better then expected. I highly recommend this holster while you are doing outdoor activities. One of my favorite is backpacking. It used to be difficult to find a holster that would let you have a backpack on and still get to your handgun. This setup works 100% and when you remove that backpack, your handgun is right where it needs to be not still attached to your backpack. Give this setup a try, you will not be disappointed.

If you are interested in this product, click here. Thanks for reading this product review.

If you have any questions about this product review or anything else related to Everyday Carry (EDC)/Concealed Carry, feel free to leave a comment below and I will be happy to get back to you.

Thanks,

Larry

Founder of Everyday Carry Essentials

May 24, 2022November 7, 2022

COLD STEEL SRK COMPACT FIXED BLADE KNIFE

Product Review

Great Compact Knife

Product: Cold Steel SRK Compact Fixed Blade Knife

Price: $35.54

Durability: High

Best Place To Buy This Product: Amazon

My Overall Rating: 9.0

Quick Product Overview:

Cold Steel makes some awesome knives, they have a full-size version called the SRK (10 3/4″ overall. 6″ blade) and now you can get almost all the performance of the SRK in a substantially shorter, lighter, and thinner package. Designed expressly for those who want or need a low-profile fixed blade. The SRK compact is almost a mirror image of its big brother with all the features you have to come to expect. Supplied with a super sturdy Secure-Ex sheath it is very lightweight and should last for years.

Specifications Of This Product:

Weight: 5.1oz

Blade Thickness: 4mm

Blade Length: 5″

Blade Steel: SK-5 w/ Black, Tuff-Ex™ Finish

Handle Length/Material: 4-1/2″ Kray-Ex™

Overall Length: 9-1/2″

Additional Features: Secure-Ex® Sheath

Knife Type: Fixed

Blade Length Range: 3-5 in

Steel Family: High Carbon Steels

Blade Shape: Clip Point

What I Like About This Product:

This knife is constructed very well and seems to hold a fine edge. It is comfortable in your hand and does not seem to create any hot spots after extended use. The SRKC works great as an EDC knife and yet is big enough to find multiple uses. The sheath is constructed very well and holds the knife in place very well.

What I Would Change About This Product:

While I like the sheath, I would like to make one modification to it. The lower plastic sheath is great but I do not like the nylon upper portion, as seen in the picture. I am going to remove the upper nylon webbing portion and install a TEK-LOK, or a rigid belt loop of some kind and that will work better for me. The sheath holds the knife very well and I do not like nylon webbing on a knife sheath or the nylon snap fastener that holds the handle in place. I like my belt fasteners to be rigid and not move around when they are on my belt.

Final Remarks:

I saw the knife on the YouTube channel, Survival on Purpose, and thought it was pretty cool. Do I need another knife – NO but I am glad I got it. It is a great-sized knife and works really well for a good basic EDC knife. It came with a decent edge on it but after touching it up with my ceramic steel it is now an outstanding edge. If you want a knife that is a good all-around knife, you need to check this SRK Compact out, you will not be sorry.

Go To EDC Backpack.

If you have any questions about this product review or anything else related to Everyday Carry (EDC)/Concealed Carry, feel free to leave a comment below and I will be happy to get back to you.

Thanks,

Larry

Founder of Everyday Carry Essentials

May 20, 2022January 17, 2024

Hammer & Punch or Sight Pusher, Which Do You Want To Use?

Putting on new sights on your handgun can be a difficult job. Back when I first started shooting all we had was a hammer and brass punch. While it got the job done it was a little difficult and the chances of marring your gun finish were substantial. Then came the sight pushers and that made this job a lot easier.

Using A Hammer And Punch

When I first began shooting there was no other way to install new sights. We all had brass punches that we used with a light hammer to install or adjust our sights. We would cover our slides with a towel and put our slides in a vise, clamp them down and punch the sight in or out as we needed. Doing things that way increased our chances of marring the guns finish.

Things To Watch Out For

When doing this procedure, we needed to make sure we covered the slide very well so we did not scratch the slide when holding it in the vise and also during the punching process, we had to be careful not to scratch our gun with the punch as well.

Using A Sight Pusher

Then came the sight pushers! It was some time around 2014 that they came on the market and the good ones made your life much easier. I say good ones because there were many on the market but they did not all work very well. If you wanted a good one then you had to pay for it. These good ones were over $100 and that was a lot of money for a tool that you only used a few times.

My first attempt at a sight pusher was to shop for price only and found a couple that was less than the higher priced ones, but unfortunately, they were garbage and did not work very well. That was very frustrating to me and a lesson well learned, you get what you pay for.

Using The VISM Universal Pistol Rear Sight Tool

Then one day I was looking in the Glock Store and noticed the VISM Universal Pistol Rear Sight Tool and it looked pretty cool. They had a video about it so I watched it, unfortunately I tried to post it but they removed it from Youtube..

It got me intrigued, and it was only $59, so I bought one. That was the best money I spent in a long time. What an excellent sight tool. It made the task of installing new sights a breeze. It took the frustration right out of the process. This should work for many makes of handguns and it is so easy to work.

Final Remarks

So what is the answer? Hammer & punch or a sight tool? If you are talking about using the VISM Universal Pistol Rear Sight Tool then the answer is yes! There are many on the market and not all of them work this easily. This tool is easy to operate and works very well and the chances of marring your gun’s finish is minimal, as long as you follow the instructions. I highly recommend this tool and I think that anyone that changes their sights needs one of these.

If you have any questions about this post or anything related to Everyday Carry (EDC)/Concealed Carry, feel free to leave a comment below and I will be happy to get back to you.

All the best,

Larry

Founder of Everyday Carry Essentials

April 8, 2022January 17, 2024

How Do You Adjust A Kydex Holster or Kydex Knife Sheath?

If you are like me you like using Kydex material for your holsters or knife sheaths. It is weather-resistant and sweat resistant and holds its shape really well. Plus there are many companies out there that will make them for you at a reasonable price. Unfortunately, sometimes the holster or knife sheath is too tight and really rubs on your finish. So at that point, you have two options: send it back to the manufacturer for an adjustment or do it yourself. I used to send them back but that takes another couple of weeks before you will get it back and I found out it is really pretty simple to make the adjustments yourself. So let’s explore the process to see if it is something you might want to try.

What Kind Of Tools Do I Need?

All you really need is a heat gun to soften the Kydex and your handgun or knife and you are in business. Because I am currently dealing with holsters at home, the rest of this article will focus on holsters. But remember you can apply all this to knife sheaths too. The main thing is not to get in a hurry, take your time and it will work very easily. I take it a step further because I make my own knife sheaths, I use a Kydex press, some blue painter’s tape, two clamps to hold the press together, and the heat gun of course. Now some people say you can use a hairdryer but I do not feel it gets quite hot enough and therefore it can get frustrating. It is not in my picture but I like to also wear a pair of leather gloves to insulate your hands from the hot Kydex and decrease a chance of a burn.

What Should I Do First?

Here is the holster I am working on today, it is an awesome OWB holster that I love to wear but it is just a little tight around the slide. I find if I do this to the holster, the finish on my handgun lasts much longer. Some people just use the heat gun to soften the Kydex, put your gun in the holster, and then systematically press on the holster in the areas that you want to change. I like to use blue painter’s tape in the areas that are tight, maybe two layers of tape to give just a little bit of clearance in those areas. Then you just can either put the holster in the Kydex press or just use hand pressure to conform the holster to the new desired contour of the holster. The Kydex Press works great when making a holster from scratch but once it is made and has belt loops, etc. already there. Hand pressure works best and does not disturb the entire holster.

Step By Step Process:

Now that I talked about some different options, let’s go through it step by step:

1) Make certain your handgun is unloaded, check the magazine and chamber before you proceed with these instructions. (If you had bullets in your magazine or handgun, remove the ammo from the area you are working on so there is no chance that you can accidentally get a bullet in your handgun).

2) Place the handgun in the holster and see where it needs adjusting.

3) Place 2 or 3 layers of blue painter’s tape on your handgun in those areas, as seen in the picture to your right. Place your leather gloves on your hands.

4) Begin heating up your holster by first placing the heat gun on high and warming it up, once warm switch to low and hear up the Kydex with the heat gun, always moving it from side to side, never keep it in one spot, that will burn the Kydex.

5) Once you feel the Kydex begin getting soft, turn the heat gun off and set it down on a non-flammable surface. Place the handgun in the softened holster and begin to push down with your thumbs.

6) When the Kydex has cooled and does not feel soft anymore, you can pull your handgun out of the holster place your handgun back in the holster and see if it still feels tight. If it does repeat the above numbers #4 – 6.

How Do I Finish The Job?

When you feel it is adjusted correctly, remove the two layers of tape, wipe down the areas where you had tape to remove any stickiness that might be there. Then place your handgun in the holster and see how it fits. If it does not drag and still clicks into place, you are done. If it still drags then put two layers of tape back on and repeat # 4-6 again. After that, remove the tape, wipe down your handgun and check the holster again. It should feel about right now. Wipe your handgun down with a little Break Free CLP and put your gun back in your gun safe and you are done. This process takes a little time but it is worth it.

Final Comments

Well now you see how adjustments can be made in Kydex. Whether it is a holster, or a knife sheath, it can be done the same way. You determine the number of pieces of tape that you use and that determines how much space you will have between the Kydex and your gun or knife. And you can always start out with one piece of tape and see how that works and then increase as you need to. But this process works great and the end result is awesome. If you have any question, please comment below and I will get back to you as soon as I can. Have a great day.

If you have any questions about this post or anything related to Everyday Carry (EDC)/Concealed Carry, feel free to leave a comment below and I will be happy to get back to you.

All the best,

Larry

Founder of Everyday Carry Essentials

April 5, 2022February 12, 2024

WAGNER SPRAYTECH HT1000 HEAT GUN KIT

Product Review

Great Heat Gun

Product: Wagner Spray Tech HT1000 Heat Gun Kit

Price: $27.99

Durability: High

Best Place To Buy This Product: Amazon.com

My Overall Rating: 9.0

Quick Product Overview:

DUAL TEMP HEAT GUN: The HT1000 Heat Gun Kit offers a 750ᵒF and 1000ᵒF temperature setting to help complete household home improvement tasks or projects that require heat
HEAT GUN FOR HOUSEHOLD PROJECTS: Use this electric heat gun to easily loosen rusted bolts, shrink heat shrink tube, remove flooring, thaw frozen pipes, shrink wrap, heat PVC, remove paint from furniture for paint removal, and more
INCLUDES THREE NOZZLES ATTACHMENTS: The kit includes an edge protector nozzle for directing heat away from delicate surfaces. The flare nozzle distributes heat across a long, narrow area. The concentrator nozzle outputs heat in a small, focused area

Specifications Of This Product:

Manufacturer

‎Wagner Spraytech

Part Number

‎2417344

Item Weight

‎1.76 pounds

Product Dimensions

‎8.5 x 9.5 x 2.75 inches

Country of Origin

‎China

Item model number

‎2417344

Size

‎HT1000 Kit

Color

‎Yellow

What I Would Change About This Product:

Nothing to change

What I Like About This Product:

This heat gun puts out a lot of heat and works very easily. The controls work well and its nice to have the “OFF” switch between the “LOW” and “HIGH” positions. Great little heat gun.

Final Remarks:

This Wagner Spray Tech Heat Gun works great and does what you expect it to do. It has two heat setting with “OFF” in the middle. The accessories that come with it may be useful in certain applications but I usually use it without those pieces. I highly recommend this heat gun.

If you are interested in this product, click here. Thanks for reading this product review.

If you have any questions about this product review or anything else related to Everyday Carry (EDC)/Concealed Carry, feel free to leave a comment below and I will be happy to get back to you.

Thanks,

Larry

Founder of Everyday Carry Essentials

March 28, 2022November 7, 2022

BREAK FREE CLP

Product Review

The best gun oil

Product: Break Free CLP

Price: $8.23

Durability: Very Good

Best Place To Buy This Product: Amazon

My Overall Rating: 9.0

Quick Product Overview:

THE ALL IN ONE FORMULA TO SERVICE YOUR FIREARM

CLEANS A proprietary, penetrating formula that breaks loose powder fouling, oil, grime, grease and corrosion that can damage metal.

LUBRICATES Reduces friction, retards wear and stops build-up of foreign matter.

PRESERVES Creates a long-lasting, protective coating that shields all metals from rust and corrosion.

Specifications Of This Product:

SPECIALLY formulated, polymerized, synthetic oils.
SAFE for all gunmetal finishes.
REDUCES FRICTION stops the build-up of foreign particles and inhibits rust.

What I Like About This Product:

I have been using it for years and it really works. Colorado is not a high humidity state and in those areas, things might be different but for my needs, it works great.

What I Would Change About This Product:

No changes are needed.

Final Remarks:

I may need to clarify one thing, I do not use this product as a one-stop shop, meaning as a cleaner and preservative in one. I like to use Hoppes #9 as my cleaner and then Break Free CLP as my gun oil to lubricate and prevent rust. And for that, it works perfectly.

If you are interested in this product, click here.

If you have any questions about this product review or anything else related to Everyday Carry (EDC)/Concealed Carry, feel free to leave a comment below and I will be happy to get back to you.

Thanks,

Larry

Founder of Everyday Carry Essentials

March 24, 2022November 7, 2022

MB SXOWBMU HANDGUN TACTICAL RANGE BACKPACK

Product Review

Awesome Range Handgun Backpack

Product: MB Sxowbmu Handgun Tactical Range Backpack

Price: $60.88

Durability: High

Best Place To Buy This Product: Amazon

My Overall Rating: 9.5

Quick Product Overview:

The MB Sxowbmu Handgun Tactical Range Backpack has three removable lockable handgun cases that can be used to store handguns and ammo. There are enough exterior pockets to fit most of the gun equipment without having to dig though a massive main compartment, but not so many that they are too small to store the necessary gun accessories. This backpack has a built-in rain shield. This rain shield will keep your hunting accessories dry when you encounter inclement weather. If you encounter any problems with the backpack after purchase, it has a lifetime warranty on the product.

Specifications Of This Product:

The size of this bag is 14″ x 8″ x 18″ ( W x D x H ).
The handgun backpack with three handgun cases is designed to organize storage for most of your equipment.
The compartments in the top of the pack can be used to carry ammo, shooting earmuffs, shooting glasses, and other handgun equipment.

What I Like About This Product:

I have always had a traditional hand-held range bag where I stored my handguns, ammo, and shooting supplies for the range. Sometimes I would have liked to have my hands free to carry other items that I needed. This backpack gives me the option to strap on these shooting supplies and still have my hands free to carry other things. I like that option. It is surprising how much stuff this backpack holds.

What I Would Change About This Product:

Some of the pockets have some very small holding areas that I can not utilize. It might be nice to have some adjustable compartments so I can adjust the size I need.

Final Remarks:

It is a nice change of pace to have a range bag that is designed like a backpack. It really holds a ton of stuff but in a way to make it conducive to putting it on your back rather than holding it in your hand. I really like the backpack and highly recommend it.

Go To EDC Backpack.

If you have any questions about this product review or anything else related to Everyday Carry (EDC)/Concealed Carry, feel free to leave a comment below and I will be happy to get back to you.

Thanks,

Larry

Founder of Everyday Carry Essentials

March 21, 2022November 7, 2022

UTG DELUXE SINGLE PISTOL CASE

Product Review

Awesome soft pistol case

Product: UTG Deluxe Single Pistol Case

Price: $20.55

Durability: High

Best Place To Buy This Product: Amazon

My Overall Rating: 9.5

Quick Product Overview:

This UTG Deluxe Single Pistol Case has a Double-sided Padded Interior. It provides Maximum Protection from Dents and Scratches to your pistol or magazines. It has five integral magazine pouches and fits most double and single-stacked magazines. The exterior accessory pocket has a hook-and-loop closure and works for most other additional range and pistol essentials

Specifications Of This Product:

Made of durable 1680D Polyester Construction
Has 1.5″ Wide Two-piece Wraparound Carry Handles for immediate grab and go
Its size is 11″ (length) x 8″ (height).

What I Like About This Product:

The padding in this case is excellent so it protects your handgun no matter what kind of conditions it is in. I like the way it secures the magazines and keeps them from rattling around too. It has nice zippers so they do not open up as well.

What I Would Change About This Product:

The case is good just the way it is.

Final Remarks:

this is a great single pistol case that holds both your pistol and magazines very securely. I have talked about using it with semi-automatic pistols, but it will work with revolvers too. I have replaced my old case with this one and I highly recommend this case if you are needing a case like this.

If you are interested in this product, click here.

If you have any questions about this product review or anything else related to Everyday Carry (EDC)/Concealed Carry, feel free to leave a comment below and I will be happy to get back to you.

Thanks,

Larry

Founder of Everyday Carry Essentials

March 14, 2022May 26, 2022

VISM UNIVERSAL PISTOL REAR SIGHT TOOL

Product Review

Excellent Sight Pushing Tool

Product: NcSTAR VISM Universal Pistol Rear Sight Tool

Price: $58.99

Durability: High

Best Place To Buy This Product: Amazon

My Overall Rating: 9.5

Quick Product Overview:

The Universal Pistol Rear Sight Tool is designed for the removal, installation, and adjusting of windage of dovetailed rear sights for most Semi-Auto Pistol slides. The Universal Pistol Rear Sight Tool works with many types of semi-auto slides: full, compact, subcompact, and pocket-sized semi-auto pistols. The base platform is adjustable for height, to get your slide and rear sights at the proper height for the rear sight pusher. Includes one bottom spacer for some pocket pistol slides for proper height alignment. The multiple vertical and horizontal clamps secure various sizes and types of semi-auto slides in the tool. The adjustable top brace with a plastic insert to secure the slide’s vertical placement on the base platform. The adjustable side braces with plastic inserts secure the slide’s horizontal placement on the base platform. Includes two sets of side plastic inserts: a pair of flat inserts and a pair of stepped inserts to fit a wide variety of slide profiles.

Specifications Of This Product:

The rear sight pusher will work with 90 degrees and 30 degree rear sight profiles. The rear sight pusher can remove, install, or adjust the rear sights in either direction.
Side witness windows machined into both sides of tool frame to check for and verify proper tool and rear sight alignment.
Sight tool frame can be bolted to, clamped onto a work surface, or clamped onto a work vice.
The rear sight pusher tool has an adjustable/removable handle or you can use a 15mm wrench or socket tool.
Heavy-duty Blue Anodized aluminum frame with steel tools
Sight pusher steel screw has brass bushings for good bearing surface characteristics and excellent strength.

What I Like About This Product:

It works so easily! I have used other sight tools and I always had to modify things so they would work. Not this tool, it comes with everything necessary to do the job.

What I Would Change About This Product:

The only thing I add when using this tool is some blue painter’s tape, just in case it would mar the finish and I am good to go and that is not really a change to the tool.

Final Remarks:

This is a great universal rear sight pusher. It is large enough to hold the large frame semi-automatic pistols slides as well as the medium and small slides too. It works very easily, which is a nice change from other sight pushers I have used. It is much better to use a sight pusher rather than a hammer and a punch, I really recommend this one, it is the only one I use now.

If you are interested in this product, click here.

If you have any questions about this product review or anything else related to Everyday Carry (EDC), feel free to leave a comment below and I will be happy to get back to you.

Thanks,

Larry

Founder of EDC Essentials